Continental Fireplaces BCDV40-P Operations Instructions download pdf (Page 22)

W415-0812 / D / 08.16.12

Combustible materials may be installed ﬂ ush with the front of the appliance but must not cover any of the black

face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in these

areas.

It is not necessary to install a hearth extension with this appliance.

When roughing in the appliance, raise the appliance to accommodate for the thickness of the ﬁ nished ﬂ oor ma-

terials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower access

door and the installation of many decorative ﬂ ashing accessories.

Objects placed in front of the appliance should be kept a minimum of 48" away from the glass front faces.

Refer to "FINISHING" section for complete instructions

regarding mantel requirements and installations, log place-

ment, glass door and upper and lower louvre attachments.

A minimum of 3" of cement board or non-combustible

equivalent must be installed against the side edge of the

appliance.

WARNING

FINISHING MUST BE DONE USING A NON-COMBUSTIBLE MATERIAL PLACED FLUSH WITH THE

FRONT FACE OF THE APPLIANCE AND EXTENDING FROM THE TOP OF THE APPLIANCE SUCH AS

CEMENT BOARD, CERAMIC TILE, MARBLE, ETC. WHEN FINISHING TO THE APPLIANCE. DO NOT

USE WOOD OR DRYWALL. ANY FIRE RATED DRYWALL IS NOT ACCEPTABLE.

DRYWALL

MIN

DRYWALL

NON-

COMBUSTIBLE

Install the base panels as illustrated in steps 1-4, see "PENINSULA

INSTALLATION PROCEDURE" section. The side panel sits under the

bracket tab. Holding the side panel in position, bend down the tab to

secure. DETAIL 6.

STEP 5

STEP 6

RETAINER

DETAIL 6

5.3 BRICK PANEL INSTALLATION

5.4 FACING

5.5 FINISHING

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 51 52

No comments

Continental Fireplaces BCDV40-P Operations Instructions Page 22